TotsBots Bamboo Inserts for Bamboozle (Peenut) SIO

* Very absorbent inserts for the PeeNut cover* Size: short insert 26 x 14cm, long insert 31 x 14cm* With snaps for attaching to coverThe PeeNut inserts consists of two bamboo inserts that are connected together with snaps. Together with the waterproof PeeNut nappy cover, they make the PeeNut Snap-In-One (SIO) system.SIO or "Snap-In-One" is a type of complete nappy, where the inserts are attached to the waterproof layer with snaps, rather than sewn together. This offers the advantages of both a one-part and two-part system. When the inserts are snapped-in, the inserts remain attached and won't slide around or fall out. However, you have the practicaltiy of a two-part nappy by being able to take out the inserts when wet and snap-in fresh ones. Therefore you can use the PeeNut cover again and again.Simply attach the shorter insert to the longer insert using snaps. Then click the absorbent pad consisting of both inserts into the PeeNut nappy cover! A nappy liner can be place on top when desired and then is the nappy ready!Smaller babys only need the shorter insert to begin with. Later you can switch to the longer insert and for maximum absorbency for heavy wetters, use both together. Therefore it is very easy to adapt the absorbency and thickness of the nappy as required.Because the inserts made from absorbent bamboo soak up quite a lot, they also dry rather slowly. For fulltime diapering with the PeeNut System we recommed 5-6 PeeNut covers, 16-20 PeeNut bamboo inserts and 3-6 night nappies e.g. the TotsBots Bamboozle or the Hu-Da Bamboo fitted nappies. The Bamboozles and Hu-Da nappies require a waterproof cover and can be used together with the PeeNut cover.Insert Surface: 80% Viscose from Bamboo, 20% PolyesterCore: 100% Polyester Microfibre (hidden layer)Wash up to 60°C, can be tumble dried.ÖKO TEX 100 zertifiziert (11-31926 Shirley)

* Award-winning * Suitable as night nappy * Three sizes for the perfect fitNewborn: 3 - 8kgOne Size: 5 - 16kgXL: 10 - 20kgBoth the outer and inner of this TotsBots fitted nappy are made from very absorbent and silky soft bamboo. Hidden inside is an absorbent core of minky, while an extra bamboo insert can be attached with snap buttons.Overall a very thirsty nappy, which when worn together with a waterproof PUL cover, makes a very safe nappy for up to 12 hours.For extra absorbency for heavy wetters, we recommend a Thirsties hemp insert to be placed under the snap-in bamboo insert. Hemp inserts absorb slowly but help retain the moisture very well.We also recommend laying a stay-dry liner in the night nappy, to help keep the baby's bottom more comfortable and drier for a longer period of time.All textiles used for this cloth nappy are environmentally friendly produced. The bamboo viscose has been ÖKO-TEX certified and is manufactured in a sustainable manner.This nappy does not have an integrated waterproof layer and needs to be worn together with a PUL cover. We recommend the covers from TotsBots or Petit Lulu. Material:Outer: 80% viscose (from bamboo), 20% polyesterCore (sewn in): 100% polyester Care:Wash up to 60 degrees. Can be dried in a tumble dryer on the lowest setting.Made in Turkey.

* SAVE 10% * 4 HERO nappies savings pack* From birth to 16kgThe Hero nappy is the first nappy that really fits from birth and then through the whole nappy season (up to 16kg)! What's more, TotsBots has combined the best of the old EasyFit All-in-One and the Bamboozle system to create a truly innovative cloth nappy. Thanks to the OEKO-TEX certified materials, it is also particularly skin-friendly and thanks to the use of recycled polyester, it is also very sustainable, saving 2 plastic bottles from landfill for each nappy.The nappy consists of a basic nappy with sewn-in absorbent pad and pocket function and an additional button-in pad. The basic nappy alone exceeds the absorbency capacity of the TeenyFit (the old newborn all-in-one from TotsBots). As soon as more absorbency is needed, the additional insert supplied can be buttoned in. It has a Stay-Dry surface with a honeycomb structure, which guarantees maximum liquid absorption and keeps baby's skin dry. If even more absorbency is needed, e.g. for the night, a power-up pad can be buttoned onto the buttonable insert. Alternatively, another pad can be placed in the pocket opening.When children start to get dry, the Hero nappy can be used as a trainer panty without additional inserts.The nappy is pleasantly soft and adapts perfectly to movements, ensuring maximum comfort. Thanks to the high-quality velcro fastener, putting it on and taking it off is child's play. With the press studs under the Velcro, the size of the nappy can be adjusted three times, in the smallest setting the Hero fits from birth.Washing instructions:Washable at 40-60°C. Do not use harsh stain removers or chlorine bleach.Line dry or tumble dry on low setting.High heat can damage the PUL! Please do not dry on the heater or hang in the sun for a long time. 

* From birth to 16kg* All-in-one with pocket function and button-in insert* Multifunctional and flexibleThe Hero nappy is the first nappy that really fits from birth and then through the whole nappy season (up to 16kg)! What's more, TotsBots has combined the best of the old EasyFit All-in-One and the Bamboozle system to create a truly innovative cloth nappy. Thanks to the OEKO-TEX certified materials, it is also particularly skin-friendly and thanks to the use of recycled polyester, it is also very sustainable, saving 2 plastic bottles from landfill for each nappy.The nappy consists of a basic nappy with sewn-in absorbent pad and pocket function and an additional button-in pad. The basic nappy alone exceeds the absorbency capacity of the TeenyFit (the old newborn all-in-one from TotsBots). As soon as more absorbency is needed, the additional insert supplied can be buttoned in. It has a Stay-Dry surface with a honeycomb structure, which guarantees maximum liquid absorption and keeps baby's skin dry. If even more absorbency is needed, e.g. for the night, a power-up pad can be buttoned onto the buttonable insert. Alternatively, another pad can be placed in the pocket opening.When children start to get dry, the Hero nappy can be used as a trainer panty without additional inserts.The nappy is pleasantly soft and adapts perfectly to movements, ensuring maximum comfort. Thanks to the high-quality velcro fastener, putting it on and taking it off is child's play. With the press studs under the Velcro, the size of the nappy can be adjusted three times, in the smallest setting the Hero fits from birth.Washing instructions:Washable at 40-60°C. Do not use harsh stain removers or chlorine bleach.Line dry or tumble dry on low setting.High heat can damage the PUL! Please do not dry on the heater or hang in the sun for a long time. 

* Waterproof* Size: 72x47 cmOn the go washable TotsBots HappyMat changing mat,  for use on public changing tables, outdoors or  on a park bench. Thick and comfortable. Material:Bottom layer: 100% Polyester (PUL)Top layer: 100% Polyester Care:Washable at 60 degrees. Do not tumble dry. 

* 16 liter bucket* 30 cm high, 35 cm diameter* Four locks on the lidDirty nappies can be placed inside the TotsBots nappy bucket and stored until washing day. The 16 liter bucket holds around 12-15 cloth nappies and has a lockable lid to hold in smells and keep curious toddler fingers at bay!The sturdy handle and handgrip enable easy transportation to the washing machine.We recommend using this nappy bucket together with two mesh laundry bags from TotsBots or avo+cado, so a fresh one can be placed inside the bucket when the other one is being washed.The mesh laundry bags fit inside the bucket and are stretched over the rim. The dirty cloth nappies are placed inside. When it comes time to wash, you can lift out the bag with all the used nappies inside and place the entire bag in the machine, without having to handle each dirty nappy.

* For newborns* Compatible with the Bamboozle 2.0 system* Absorbent pad with stay-dry fleeceThis bamboo pad fits perfectly into the TotsBots newborn nappy cover. It is ideal for the first diaper changes as it has a top layer of extra soft stay-dry fleece to keep moisture away from your baby's skin. The bamboo underside absorbs and retains moisture, providing an excellent fitting and adorable daytime nappy system for your newborn. And it's not just for newborns, as your baby grows, these pads can also be used in other diapers to increase absorbency when needed. The materials used are Oeko-Tex 100 certified.USEFUL TIP: You can use more than one pad at a time, double up once the baby starts urinating more.Materials:Outer: 80% viscose (from bamboo), 20% polyesterAbsorbent core (inner layer): 100% polyesterWashing:Machine washable up to 60 degrees Celsius.Can be tumble dried on the lowest setting.Do not use bleach or fabric softener.Dimensions: 27x13 cmMade in Scotland.

* Pull-Up swim nappy* Slim fit* Made from recycled PET bottlesThe TotsBots Pull-Up Swim Diaper is a lightweight, stretchy swim nappy with a slim cut. It has no fastening and can instead simply be pulled up, making it very easy to put on. To ensure a good fit, the swim nappy comes in five different sizes from 0 to 36 months.The elastic waist and leg cuffs fit snugly around your child and keep the swim nappy in place even when splashing around. Thanks to the thin, lightweight fabric, the nappy dries very quickly and can also be worn after swimming.The outer shell of the swim nappy is made of polyester, which is completely made from recycled plastic bottles. The inside of the swim nappy is made of cuddly soft microfleece. After bathing in chlorine or salt water, the swim nappy should be rinsed out properly.Care:Washable up to 40°C. Tumble dry (gentle setting). Do not use bleach, fabric softener or detergents with optical brighteners.After bathing in chlorine or salt water, the swim nappy should be rinsed properly.Material:Outer: 100% polyesterInside: 100% polyester (fleece)Made in Scotland. 

* Leakproof fit* Comfortable and stretchySizeM: Waist 30-43 cm / 4,5-9 kgL: Waist 35-52 cm / 9-16 kgThe TotsBots washable swim nappies have a comfortable and stretchy fit, allowing your little one to do some serious splashing!The elasticated legs and waist make a snug and leakproof fit with a soft microfibre interior to catch any accidental poos.The hook & loop fastening means the SwimTots are easy to put on and take off.Reduce waste in comparison to disposable swim nappies by simply washing and reusing again!The swim nappy does not require any additional absorbent insert or nappy liner. Please rinse the swim nappy from chlorine and salt water after use.Material:Outer: 92% Polyester, 8% ElasthanInner: 100% PolyesterCare:Wash up to 40 degrees. Do not tumble dry. 

* Two bags in one* Keeps odours in* Fits 4-6 AIO nappiesSize M: 30x40 cmThe handy TotsBots Wet Bag with two compartments can easily be used for your afternoon in the city, a day trip or simply for daily use at kindergarden. It can be used to carry a spare set of clothes, used nappies, swim clothing or even toys or a camera. The two wet bags are connected with snaps, meaning both wet and dry items can be carried together. The smaller wet bag can easily be snapped off to be used separately, if necessary. The bigger wet bag is 30x40 cm and fits 4-6 All-In-Ones, while a snap on the handle makes it easy to attach the bag to a stroller or carry it around with you. The smaller wet bag measures 30x32 cm and fits 4-5 All-In-Ones. It can be used separately or together with the bigger one.Material:100% polyester (Polyurethan laminated)Care: Wash up to 40°C. Do not tumble dry. 

* Handle with snap* Keeps odours in* Fits 4-6 AIO nappiesSize M: 30x40mThe handy TotsBots Wet Bag can easily be used for an afternoon in the city, a day trip or simply for daily use in kindergarden. It can be used to carry a spare set of clothes, wet clothes, swim clothing or even toys or your camera. The wet bag is 30x40cm and fits 4-6 All-In-Ones, while a snap on the handle makes it easy to attach the bag to a stroller or carry it around with you.Material:100% polyester (Polyurethan laminated)Care:Washable up to 40°C. Not suitable for the dryer.Protect from heat, do not dry on your heater or leave in the sun for long periods of time. Do not use bleach or softeners.Material:100% Polyester.

* Nappy Cover with Velcro fastener* Available in 3 sizes* With flapsNewborn: 3-8 kgOneSize: 5-16 kgXL: 15 kg+The TotsBots Wrap Nappy Cover is the advanced version of the popular PeeNut V2 Cover. Made from recycled polyester with a water-repellent layer of polyurethane (PUL), they impress with their soft and supple fabric - a TotsBots trademark.The new version once again has the practical flaps on the front and back, which ensure that insoles stay securely in place. The Velcro fastener allows for infinite adjustment at the waist, while the press studs on the front make the length individually adjustable. Soft leg cuffs and an elasticated, soft back elastic not only offer reliable leakage protection, but also a high level of comfort.In combination with the Bamboozle bamboo absorbent pads, the wrap become the Bamboozle Snap-In-One (SIO) system. The absorbent cores are easy to snap in and thanks to their versatility, the covers can be used just as well with other pads (e.g. prefolds, gauze diapers) or panty diapers from other brands - ideal for day and night.For the complete outfit we recommend:5-8 TotsBots Wraps16-20 Bamboozle bamboo absorbent pads4-6 night nappies (e.g. TotsBots Bamboozle or avo+cado panty diapers)Material: 100% polyester (with PUL), OEKO TEX 100 certified (11-31926 Shirley)Made in HungaryCare instructions:Machine washable up to 60 °C. To protect the materials and maintain longevity:Do not bleach.Tumble dry at low temperature only.Do not iron or dry clean.Wash dark colors separately.Do not use stain removers, fabric softeners or oil-based products.